Cabinets

Biological Safety Cabinet, Type II, A2, Model BSFII-A2, Make: URBiocoction
Ergonomic design for versatile usage, eases of use, plug & play system.
 Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295)
providing particle free air to meet class 100 condition.International Standards - UK Complied  Certifications – ISO 9001:2015, CE. GMP.

Details :

• Ergonomic design for versatile usage, eases of use, plug & play system.
• Designed so as to meet the requirements of US Federal Standard 209 B (BS5295)providing particle free air to meet class 100 conditions
• International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.
• Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name. Internal   IQ / OQ / PQ Certification .
• The Class-III Biological Safety Cabinet are designed for work with Biosafety level 4 high-risk microbiological agents and provides maximum  protection to the environment and  the worker. It is a gas-tight enclosure with a non- opening, completely sealed, viewing window. Access to the interior  of the cabinet is through a double door pass-through “interchange” box. Reversing that process allows for the safe removal of materials from Class III  Biosafety cabinet.100 % air exhaust.
• Ambient air is taken through HEPA- filter at the top of the cabinet and passes through down flow HEPA Filter and enter working zone as laminar flow, the uniform non turbulent  air stream protects against cross  contamination within & throughout the  work area. Near the work surface area splits in two, exits the cabinet through  perforations around the perimeter of the work zone.
• Exhaust air pass through HEPA Filter & Virus burn unit,Exhaust ducting with L- Bent PVC pipe supplied with the machine
• Long, gloves and glove parts are attached in a gas-tight manner to ports of the cabinet. Although these gloves restrict movement for the manipulation of the materials isolated inside the cabinet, they prevent the user’s direct contact with the hazardous materials. THE TRADE-OFF IS CLEARLY ON THE SIDE OF MAXIMIZING PERSONAL SAFETY.
• Material Of Construction:- Outer Body- CRCA Sheet epoxy Powder coated antibacterial & Antirust effect, 22 gauge OR Stainless Steel-304 PVC /Matt grit/ Sattin finish , 22 GAUGE 
• Work table top: - SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE. Single piece without  
• Any internal joint or welding with below spillage collection zone. The work table can be removed for cleaning of the spillage. Front & rear air grille at the working chamber.

Details :

• Ergonomic design for versatile usage, eases of use, plug & play system.Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions
• International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.
• Company is under Make in India & MSME Certified with International standard, Certified model with duly mentioned brand name .Internal IQ/OQ/PQ Certification.
• Re circulates 70% of HEPA filtered air and Rest 30% exhausted through a HEPA filter and discharged to the lab or exhausted through an optional exhaust system
• HEPA-filtered exhaust air in Type A2 cabinet May be re circulated into the room or exhausted to the outdoors through a canopy exhaust connection.
• HEPA-filtered down-flow air is a portion of mixed down-flow and inflow air from a common plenum.
• Negative Pressure air surrounding all Biological contaminated ducts and plenums.
• Negative pressure surrounds the work area With double wall plenums for protection
• High velocity air forced through HEPA filters, Filtered air is thrown in the chamber with a high velocity which in turn disperse particulate matter on all surface , The lower portion of the Air showers suck the contaminated air and allow it to pass to blower supply plenum , This process is a continuous process in which air is continuously filtered and recirculated inside the chamber without any exchange with the external environment
• Exhaust air pass through HEPA Filter & Virus burn unit .Exhaust ducting with L- Bent PVC pipe supplied with the machine.
• Material Of Construction:- Outer Body- CRCA Sheet epoxy Powder coated antibacterial& Antirust effect, 22 gauge OR Stainless Steel-304 PVC /Matt grit/Sattin finish, 22 GAUGE 
• Work table top: - SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE. Single piece without 
• Any internal joint or welding with below spillage collection zone. The work table can be removed for cleaning of the spillage. Front & rear air grille at the working chamber.

Details :

• Biological Safety Cabinet,TypeII,B2,Model:BSFIIB2, Make: UR Biocoction
• Ergonomic design for versatile usage, ease of use, plug & play system.
• Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions
• International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.
• Company is under Make in India & MSME Certified with International standard,
• Certified model with duly mentioned brand name. Internal IQ/OQ/PQ Certification.
• Ambient air is taken through HEPA - filter at the top of the cabinet and passes through down flow HEPA Filter and enter working zone as laminar flow, the uniform non turbulent air stream protects against cross contamination within & throughout the work area. Near the work surface area splits in two, one move towards the front grille and another towards back rear grille. Ambient air is also taken via front grille but doesn’t mix with the clean air within the work zone. A combination of inflow and down flow air  streams forms an air barrier that prevents contaminated room air entering work zone and enters common air plenum and then exhaust by dedicated ducting system , 100% air exhaust Exhaust air pass through HEPA Filter & Virus burn unit ,Exhaust ducting with L- Bent PVC pipe supplied with the machine
• Material Of Construction:- Outer Body- CRCA 
• Sheet epoxy Powder coated antibacterial &
• Antirust effect, 22 gauge OR Stainless Steel-304 PVC /Matt grit/ Sattin finish, 22 GAUGE 
• Work table top: - SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE. Single piece without any internal joint or welding with below spillage collection zone. The work table can be removed for cleaning of the spillage. Front & rear air grille at the working chamber.
• Front door – Counter balanced weight with 5 mm toughened/tempered glass UV – protected to protect customer from UV Exposure – complete  transparent along with base structure to hold the cabinet & ease of access.
• Air flow type: - Vertical Air flow from the top.
• Air Flow Velocity:- 90 FPM ±20%, Inflow Velocity: 0.53 m/s,Down flow Velocity: 0.33 m/s
• Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination
• Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA & Very low vibration