Leading Manufacturers, Exporters, Wholesaler, Retailer and Distributor of MS-PP Fume Cup Board, Full SS Fume Cup Board and MS-SS Fume Cup Board from Kolkata.
Ergonomic design for versatile usage, ease of use, plug & play system.
International Standards – UK Complied Certifications – ISO 9001:2015, CE. GMP.
Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name.
Material of Construction – Outer Body- CRCA Sheet epoxy Powder coated worktable also. Inner body PP Sheet wrapping for chemical resistance.
Working Chamber Size – 3x2x2 ft
Front door – Counter balanced weight with 5 mm toughened/tempered glass UV – protected to protect customer from any Exposure – complete transparent along with base structure to hold the cabinet & ease of access
Air flow type – Auto Bypass Type , Design-Aerodynamic
Baffle arrangement – Interstitial 3-point suction system (for light, normal & heavy fumes) with baffle to ensure smooth and immediate exhaust of fumes. Baffle with Additional holes for better suction. Plenums are designed and adjusted ergonomically.
Front SS -304, Hand rest/Air foil with suction point below & Door top suction point.
Centrifugal Blower – Silent high efficiency remote blower, consisting of continuous rating motor and chemical resistant impeller.
Air Suction Capacity – 800-1000 CFM confirming to international (0.5mtr/sec) face velocity norms and as per safe fume hood airflow pattern.
Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA & Very low vibration, internally built in.
Sink with Water tap with drain arrangement – All are PP Materials.
3 OR 4 NOS Service Valves – Water/Air/Nitrogen/Gas/Vacuum – remotely controlled with internal and external inlet and outlet nozzles, color coded – Completely PP Coated
Top removable panel for easy access to electrical fittings and easy removable fittings placement for ease of access during service.
Level adjusting screws – Made of SS Bolts to adjust the fume hood level by approx. +10 mm.
Exhaust Port – Top/Side – Smooth exhaust without any turbulence , PVC L bent supplied along with the machine for exhaust connection from the Lab
Apparatus/Chemical Storage Base Cabinet – Base cabinet ready to receive the fumehood at its top with following features :
Complete rigid structure to support Fume hood.
Epoxy powder coated rigid structure.
Front and back door for ease of access towards storage materials
Hinged doors – Front Opening
Side shelves for storing of consumables
Power supply – 220-230 V, 50-60 Hz, 5/15 amps power cord.
Optional
Electricals fittings & Fixtures :
Microprocessor based PID Controller –FL light ON-OFF, Blower 3 speed control – High, Low, Medium
Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting
1/2/3 set of electrical panels –each consist of 2 nos of 5/15 amp plug points with switches.
Ergonomic design for versatile usage, ease of use, plug & play system.
International Standards – UK Complied Certifications – ISO 9001:2015, CE. GMP.
Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name.
Material of Construction – Outer Body- CRCA Sheet epoxy Powder coated worktable also. Inner body PP Sheet wrapping for chemical resistance.
Working Chamber Size – 2x2x2 ft
Front door – Counter balanced weight with 5 mm toughened/tempered glass UV – protected to protect customer from any Exposure – complete transparent along with base structure to hold the cabinet & ease of access
Air flow type – Auto Bypass Type , Design-Aerodynamic
Baffle arrangement – Interstitial 3-point suction system (for light, normal & heavy fumes) with baffle to ensure smooth and immediate exhaust of fumes. Baffle with Additional holes for better suction. Plenums are designed and adjusted ergonomically.
Front SS -304, Hand rest/Air foil with suction point below & Door top suction point.
Centrifugal Blower – Silent high efficiency remote blower, consisting of continuous rating motor and chemical resistant impeller.
Air Suction Capacity – 800-1000 CFM confirming to international (0.5mtr/sec) face velocity norms and as per safe fume hood airflow pattern.
Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA & Very low vibration, internally built in.
Sink with Water tap with drain arrangement – All are PP Materials.
3 OR 4 NOS Service Valves – Water/Air/Nitrogen/Gas/Vacuum – remotely controlled with internal and external inlet and outlet nozzles, color coded – Completely PP Coated
Top removable panel for easy access to electrical fittings and easy removable fittings placement for ease of access during service.
Level adjusting screws – Made of SS Bolts to adjust the fume hood level by approx. +10 mm.
Exhaust Port – Top/Side – Smooth exhaust without any turbulence , PVC L bent supplied along with the machine for exhaust connection from the Lab
Apparatus/Chemical Storage Base Cabinet – Base cabinet ready to receive the fumehood at its top with following features :
Complete rigid structure to support Fume hood.
Epoxy powder coated rigid structure.
Front and back door for ease of access towards storage materials
Hinged doors – Front Opening
Side shelves for storing of consumables
Power supply – 220-230 V, 50-60 Hz, 5/15 amps power cord.
Optional
Electricals fittings & Fixtures :
Microprocessor based PID Controller –FL light ON-OFF, Blower 3 speed control – High, Low, Medium
Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting
1/2/3 set of electrical panels –each consist of 2 nos of 5/15 amp plug points with switches.
Ergonomic design for versatile usage, ease of use, plug & play system.
International Standards – UK Complied Certifications – ISO 9001:2015, CE. GMP.
Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name.
Material of Construction – Outer Body- CRCA Sheet epoxy Powder coated worktable also. Inner body PP Sheet wrapping for chemical resistance.
Working Chamber Size – 2x2x2 ft
Front door – Counter balanced weight with 5 mm toughened/tempered glass UV – protected to protect customer from any Exposure – complete transparent along with base structure to hold the cabinet & ease of access
Air flow type – Auto Bypass Type , Design-Aerodynamic
Baffle arrangement – Interstitial 3-point suction system (for light, normal & heavy fumes) with baffle to ensure smooth and immediate exhaust of fumes. Baffle with Additional holes for better suction. Plenums are designed and adjusted ergonomically.
Front SS -304, Hand rest/Air foil with suction point below & Door top suction point.
Centrifugal Blower – Silent high efficiency remote blower, consisting of continuous rating motor and chemical resistant impeller.
Air Suction Capacity – 800-1000 CFM confirming to international (0.5mtr/sec) face velocity norms and as per safe fume hood airflow pattern.
Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA & Very low vibration, internally built in.
Sink with Water tap with drain arrangement – All are PP Materials.
3 OR 4 NOS Service Valves – Water/Air/Nitrogen/Gas/Vacuum – remotely controlled with internal and external inlet and outlet nozzles, color coded – Completely PP Coated
Top removable panel for easy access to electrical fittings and easy removable fittings placement for ease of access during service.
Level adjusting screws – Made of SS Bolts to adjust the fume hood level by approx. +10 mm.
Exhaust Port – Top/Side – Smooth exhaust without any turbulence , PVC L bent supplied along with the machine for exhaust connection from the Lab
Apparatus/Chemical Storage Base Cabinet – Base cabinet ready to receive the fumehood at its top with following features :
Complete rigid structure to support Fume hood.
Epoxy powder coated rigid structure.
Front and back door for ease of access towards storage materials
Hinged doors – Front Opening
Side shelves for storing of consumables
Power supply – 220-230 V, 50-60 Hz, 5/15 amps power cord.
Optional
Electricals fittings & Fixtures :
Microprocessor based PID Controller –FL light ON-OFF, Blower 3 speed control – High, Low, Medium
Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting
1/2/3 set of electrical panels –each consist of 2 nos of 5/15 amp plug points with switches.